Opening training…
Search
Team
0
P01 knowledge check
Product Knowledge: Coatings & Sealers
Pass is 80%. This is open-book — use the academy, not hope.
1. Which MavCoat can NEVER be used as a topcoat?
MavCoat SLE
MavCoat OPE
MavCoat NV
MavCoat FC
2. True or false: MavCoat SLE is an appropriate topcoat under heavy forklift traffic.
True
False
3. MavCoat OPE serves as:
Basecoat only
Topcoat only
Basecoat or topcoat with built-in slip texture
Broadcast media only
4. MavCoat FC is designed to receive:
A UV-clear polyaspartic topcoat
A broadcast media into the wet film
A moisture vapor barrier primer
Direct chemical exposure with no topcoat
5. True or false: MavCoat HPE can be used as a clear topcoat over a MavTop flake system.
True
False
6. Which describes MavCoat SLE?
100% solids self-leveling epoxy primer / basecoat that must be topcoated under heavy traffic
A broadcast-into-only build coat
A novolac chemical-resistant topcoat
A moisture vapor barrier primer
7. True or false: all MavCoat products ship from the factory pre-pigmented — the applicator picks the color at order time.
True
False
8. Under heavy forklift traffic, MavCoat SLE requires:
No further protection
A second SLE coat
A MavSeal aliphatic topcoat over it
A colored quartz broadcast
9. True or false: MavCoat OPE cures with a built-in orange peel texture that delivers slip resistance without broadcast aggregate.
True
False
10. A customer needs a body coat that self-levels, hides minor imperfections, and takes a broadcast quartz. Spec:
MavCoat FC
MavCoat SLE
MavCoat NV
MavSeal HWU
11. MavCoat WBE (water-based epoxy) is the right pick for:
A chemical processing floor with 30% HCl exposure
A school corridor recoat where the building stays occupied and solvent exposure must be minimized
A negative-20 blast freezer
A heavy forklift manufacturing floor
12. True or false: MavCoat WBE is suitable for a chemical processing plant with concentrated acid exposure.
True
False
13. MavCoat Metallic is engineered to be:
A stand-alone topcoat direct to concrete
Applied over a tinted basecoat on sealed concrete, then top-coated with a MavSeal
A broadcast media into a wet MavTop
A moisture vapor barrier primer
14. The MavCoat HB epoxy system stack, bottom to top, is:
Concrete → MavCoat FC primer → MavCoat NV topcoat
Concrete (CSP 3+) → MavCoat epoxy primer clear → MavCoat SLE body coat (high build) → optional MavSeal topcoat
Concrete → MavCrete UM → MavSeal UPA
Concrete → MavCoat WBE base → MavCoat WBE second
15. True or false: MavCoat MVB is a moisture vapor barrier primer that resists MVT up to 25 lb per 1,000 SF per 24 hours.
True
False
16. MavSeal UPA is available in which cure options?
Standard cure only
Fast cure and gel cure
Slow, medium, and fast cure
Winter blend and summer blend
17. True or false: MavSeal UPA cures faster in high humidity.
True
False
18. The MavSeal with a 13-minute pot life once mixed is:
MavSeal UPA
MavSeal UHD
MavSeal HWU
MavSeal RCU
19. True or false: MavSeal HWU is best applied as a thin sealer over an already-sealed system — NOT as the topcoat over a MavTop flake broadcast.
True
False
20. You are spraying MavSeal UPA at 90% RH in July. Set the cure to:
Fast
Medium
Slow
Any — humidity does not affect polyaspartic cure
21. True or false: MavSeal RCU, once applied on the floor, cures like a polyaspartic.
True
False
22. MavSeal HSU is best described as:
A rapid-cure polyaspartic
A near-zero-VOC high-solids aliphatic polyurethane topcoat for interior industrial use
A moisture vapor barrier primer
A joint filler
23. MavSeal HTU is packaged as:
A single-component moisture-cure sealer
A 2-component sealer with no filler
A 3-component satin aliphatic urethane — Part A + Part B + Wear Filler
A cementitious powder + resin blend
Score quiz
Back to module
